ELECTRONIC BALLASTS 200W … 500W for UV-C amalgam lamps
EB500
High efficiency electronic ballasts with pre-heating of the filament at the start for amalgam lamps 200W to 500W, in a metallic enclosure for easy panel mounting. Internal software is proprietary.
The input stage ensures an active power factor correction for low ThdI in accordance with CEI EN compliance. There is an internal monitoring of the temperature, to manage overheating and preserve the lamp’s life and components’ integrity.
The ballasts are designed for a fast assembling with their screw less terminal blocks, and for an easy mounting, thanks to the metal housing with loopholes for thermal flow.
Available with a free potential relay and led for “smart monitoring”. Characterized by an automatic shut off, in case of lamp fault or disconnection.
EB500 S
High efficiency electronic ballasts with pre-heating of the filament for amalgam lamps 200W to 500W, in a metallic enclosure for easy panel mounting. Characterized by dimmable input 0-10V or 4-20mA.
The input stage ensures an active power factor correction for low ThdI in accordance with CEI EN compliance. There is an internal monitoring of the temperature, to manage overheating and preserve the lamp’s life and components’ integrity.
The ballasts are designed for a fast assembling with their screw less terminal blocks, and for an easy mounting, thanks to the metal housing with loopholes for thermal flow.
Available with a potential free relay for “smart monitoring” in case of lamp failure (with alarm) and auto shut off operation. It is equipped with a LED: red for lamp failure, orange for the pre-heat status of the lamp and green for the run mode.
EBA500 EBA500S
Integrated high efficiency electronic ballasts for amalgam lamps 200W to 500W, in a metallic enclosure for easy panel mounting, with partial and total hour counter.
Characterized by a free contact relay for “smart monitoring” in case of lamp fault and automatic shut off operation. Available with optional irradiance or temperature sensor management, to be selected from the board by the ‘setup menu’.
The power board is integrated with a logic, equipped with a white/blue 2 raw x8 backlighted display, three buttons for main operation and a led for fault signaling. The control logic has an on/off command via “ok” button and a remote on/off.